Here is a receipt for friction polish also known as OB Shine Juice

Mix 1/3 Boiled Linseed oil 1/3 white shellac and 1/3 denatured alcohol in a small bottle with a tight lid. Don’t put it in a spray bottle as the alcohol will evaporate off very fast. One of these 3oz plastic travel bottles you can buy at the drug store works great but I wouldn’t make 3 ounces at a time unless you use a lot of finish. I draw 3 lines on the bottle at 1/2-1-1 1/2 inches and add each ingredient to the line. That will keep your finish fresh. Put a small amount on a paper towel with the lathe turning slow and cover the entire piece turn the speed up and continue to apply coat after coat until you have 6 to 10 coats applied adding a little more polish to the towel with each pass. Let this dry for 24 hours and then top coat with your preferred final finish. Nice stuff and pretty easy to get a great shine.